ANTECH provides a range of instruments for uranium and plutonium waste assay. These are based on a range of technologies, including gamma ray measurement, neutron measurement and calorimetry. In addition, ANTECH provides gamma ray instruments for determining the ratio of plutonium isotopes, which are used with neutron and calorimetry assay methods.
The ANTECH G3250-220 Wide Range Segmented Gamma Scanner (WR-SGS) builds on the segmented gamma scanning technique to measure the radionuclide content of waste drums.
The ANTECH Universal Neutron Counter N2000 has been designed to provide a state of the art neutron counting capability for nuclear safeguards, waste assay and accounting measurements for special nuclear materials.
The ANTECH Model N2442 Active Well Coincidence Counter (AWCC) is a transportable high efficiency neutron counter for the measurement of plutonium and uranium.
The ANTECH N2240 Series are enhanced efficiency active-passive neutron counters for the measurement of plutonium and uranium in nuclear waste.
The ANTECH N2940-2552 Active-Passive Crate Counter is an enhanced efficiency active/passive neutron counter designed for the measurement of plutonium and uranium in nuclear wastes contained in a variety of crates and waste boxes.
The ANTECH B2308 Combined Isotopic and Plutonium Scrap Multiplicity Counter for cans quickly and accurately determines the plutonium content of Special Nuclear Materials (SNM), scrap and residues.
The ANTECH N1081 De-Randomising Mixer Buffer provides useful test and diagnostic information for multi-counting chain neutron detectors by determining independent software readable neutron totals counting for each input counting chain and statistical data analysis for each counting channel.
The N2024-220 Decommissioning Piece Monitor is a transportable efficient neutron assay instrument for the monitoring of intermediate level Plutonium Contaminated Material (PCM) waste arising from decommissioning operations.
The design of the demountable CA503-260 High Sensitivity In-Line (Glove Box) Calorimeter is based around a sample well that maintains glove box integrity.
The ANTECH Model N2018 High-Level Neutron Coincidence Counter is a medium efficiency passive neutron counter for measuring the spontaneous and induced fission from the even isotopes of plutonium bearing samples, including PuO2, mixed oxides, metal carbides, solution and scrap.
The G3400-220 Low Level Waste Segregation and Sentencing System is designed to assist radioactive waste generators and assay specialists with the task of identifying, quantifying, and sorting radioactive wastes.
The ANTECH N2023-M Neutron Coincidence Collar (NCC), similar in specification to the ANTECH N2044 Neutron Coincidence Collar (NCC), is used by safeguards inspectors to verify the fissile material content of fresh BWR nuclear fuel assemblies.
The ANTECH N1003 Series Neutron Time Correlation Analyser (TCA) is a comprehensive multiplicity counter for the passive neutron analysis of plutonium.
The N2920-2550 Passive Neutron Crate Counter is used for the determination of the Pu-240 mass in transuranic (TRU) waste transport containers.
The N2004 Passive Neutron Slab Counter & Curium Monitor is a simple, non-quantitative neutron slab counter for the detection of curium contamination in waste drums, boxes or crates.
The ANTECH Model N2098 Plutonium Scrap Multiplicity Counter is a high efficiency passive neutron counter for measuring the multiplicity of neutron emissions from the spontaneous fission and induced fission of plutonium bearing samples of scrap and residues.
The ANTECH CHF400 Series Precision Twin Cell Sample Calorimeters feature a thermostatically controlled calorimeter body that houses two identical cylindrical or rectangular cells, one “sample” and one “reference”. Both cells have the same construction and the same heat transfer properties. The CHF400 Series are available in a variety of volume sizes.
Environmental Monitoring, Gamma, Gamma ray Waste Assay, Homeland Security, ILW & high activity waste, LLW & greater than Class C waste, Plutonium & Uranium waste, Radiation Detection, Remote handled waste, Special Measurement Applications, TRU waste & ILW
RadSearch is a device for measuring and quantifying radiation in the environment. It is particularly applicable to decommissioning and nuclear cleanup activities.
The N2072 Passive Neutron Decommissioning Piece Monitor is a high efficiency passive neutron counter designed for the measurement of plutonium contaminated size reduced pieces arising from the decommissioning of nuclear plant and equipment.
The ANTECH Model G3200-340 Segmented Gamma ray Scanner (SGS) provides a non-destructive method of measuring the radionuclide content of waste, typically of Low Level Waste (LLW).
The ANTECH G3810 Tomographic Gamma Scanner for cans and small objects combines the functions of plutonium isotopic ratio analysis and tomographic gamma scanning in a single automated instrument.
The G3850 Tomographic Gamma Scanner (TGS) uses transmission corrected, single photon emission computerised axial tomography to determine the spatial distribution and quantity of radionuclides in a drum or can.
The ANTECH G3250-3850-320 Wide Range Segmented/Tomographic Gamma Scanner (WR-SGS/TGS) builds on the segmented gamma scanning technique to measure the radionuclide content of waste drums.